Multi Purpose Piezo Ignition Torch

Ignition Torch Ignition Pattern: Piezo ignition Connection Type: Bayonet type Environment-friendly Compact and portable

     

Factory Description

Specializes in gas welding tools since2000

With the advantage of good quality with better price.With productin capacity up to 25,000pcs/monthWith pleasure to make changes or OEM for ur local market

Detailed Product DescriptionThe full name of the product:Multi Purpose Torch Piezo Ignition

Model No:	JD-8035	Igniion Pattern:	Piezo Ignition
Product Weight :	145g	Connection Type:	Bayonet type
Product Size:	149mm*42mm*65mm	The maximum flame length	About 175mm
Product Material:	Copper+Zinc alloy+Stainless steel+Plastic	The minimum flame length	About 25mm
Product Packaging:	Single-sided blister, Paper card. Within the box outside the box, 100a/box	The best flame length	About 165mm
Product's Diameter:	19mm	The flame's size	Thick (Can be adjustable)
Product's Clamp Diameter:	42mm	The flame's form	Concentrate
The Burning time	About 200 minutes	The Best Fuel	Liquefied butane gas (purity no less than 95%)

 The advantange of parts:1.Copper high-pressure nozzl2.Gas regulator switch3.Ignition button4.Enter wind hole5.Cylinder positioning device Something should be draw your attention as follows:          1.Some parts will be very hot during and after use,So keep young children away.          2.Change the gas cartridge outside away form sources of heat or naked flame such as pilot lights, electric fires ect and away form other people          3.This appliance should be used away form flammable materials and at least one meter away foem adjacent surfaces (wall,ceiling). Be especially careful near fat fryers, electric hobs and sources of naked flame.

          4.Be aware of flaring which may occur during the two minute warm-uo period and in  which the appliance should not be angles more than 15 degrees form the vertical (upright) position, And two minutes of running, the appliance is preheated and can be used at any angle without flaring

Instructions for use:

Ignition:

   1.Turn the knob slowly in the "+" direction to start gas flowing then press the "Push" button in the center of the control knob until it clicks

   2.Repeat of unit fails to light

After Use:

1.Check the appliance is clean and dry.

2.Store in a cool, well ventilated place after separating the cartidge from the appliance and replacing cap 

 

Multi Purpose Piezo Ignition Torch