Double Switch Gas Heating Torch/ Welding Torch/Cutting Torch

Gas Heating Torch Ignition Pattern: Manual Ignition Connection Type: Threaded port Easy To Operating Could reach in 1300degr

Product Introduction:

This style gas blowtorch can be reach into 1300degree use in proper way.

Low cost, Safe and Easy to Operating, No Pollution, Stable Property .

Functions:

Use Method:

1. Inspection: Connect the parts of the torch, put the gas pipe to connect the gas chuck, make sure it tighten up, and close down the knob switch to the position of "−", then open the gas cartridge's valve , to check whether have gas leak out.

2.Ignition:   Rotates the knob switch(or press the push switch)  in gently, and then light a fire in the nozzle, can be control the knob switch(or the push switch) to adjust the flame size

3.To shut off: Close down the gas cartridge valve, until the flame is die out ,and then to close down the knob switch ,make sure there is no gas leakage in the trachea, and then hanging up the torch store in a cool ,well ventilated palce .

Parts of Product:

Instructions:

1.Make sure that the cock for the gas supply on the torch is firmly closed, The closing force of the handwheel must be 0.3N/m.

2.Connect the hose to the torch by means of suitable spanners.

3.Connect the hose to the pressure reducer and then to the cock.

4.Open the gas bottle cock.

5.Check the seal between the torch and the hose and between the hose and the gas bottle by means of a suitable gas leak spray detector.

6.Should you notice any gas leak, close the gas bottle anche check again tightenings and seals,Contact your reseller if the problem doesn't disappear

7.Slightly open (1/2 turn) in anticlockwise direction the handwheel of the cock and put a flame near the nozzle.

8.Open completely the cock in order to get the maximum power from your torch.

9.At the end of your work always close the cock of the gas bottle and secondly the cock of the torch.

10.When changing an empty gas bottle for a new one, always make this operation in a well ventilated area and away from any heat source or flame, Then repeat the operations from point 1.

Packaging in Details:

Attention:

     Check the presence of the gasket between pressure reducer and the gas bottle cock, The anti-bursting safety valve (when it is present) has to be placed between the hose and the pressure reducer.

Warings:

1.Use only with propane gas at a pressure between 0.5 and 3.0 BAR.

2.Do not use reducers with fixed calibration for domestic use ,since the delivered pressure is not sufficient.

3.Use only outdoors or in well ventilated places.

4.At the end of your work the nozzle will be very hot ,store it in a safe palce away from flammable materials.

5.This appliance must be serviced only by a qualified technician authorized by the manufacturer, use only original spare parts.

Double Switch Gas Heating Torch/ Welding Torch/Cutting Torch